Nissan cabstar with a tipmaster tipper

[gensetsteve]

Get a bolt for now. Check with tip master about the tensile strength as it may be more than a standard 8.8 bolt and it looks kind of crucial.

[log supplier]

if that pin pops out of one side of the jack arm it will cause you some problems...

it will bend the jack arm..

best not tip at all imo..

get a new pin.

[sihart100]

im hopping to get it sorted asap theres no chance of pin popping out as the bit that goes through the ram is larger than the hole. ive tried tipmaster and they have changed there deign and dont think they still do the parts anymore, worst case i will have to get 1 fabricated

 

would still like to know tho how its should be as standard the tipper was on it from new its a 2003 52 reg so should be fairly common, tipmaster are not shure how ot should be but the new ones dont have bolts just shaft with washer and split pin to hold it all in place but they wont fit mine un less i drill the housing to size

[Mesterh]

If the bit in the ram is larger than the hole how does the pin come out?

 

Oxy/acetylene is your friend on that one