Jump to content

Log in or register to remove this advert

100foot plus reduction


gibbon
 Share

Recommended Posts

This is my current challenge.

 

The spec is a 2 phased reduction. The finished reduction reduction in winter 2011/2012 will be 3m from height and reduction of lateral limbs by 3-4m. Each limb is to be pruned only once. The 1st phase was to reduce half of the tree in segments but retain the overall shape and form/

 

I havent measured it yet, but despite how it looks in the photos it is at the very least 100ft.My 45m rope only took me 2/3 of the way down,

 

I think we took out 2-2.5 tons of material today.

 

Before and after day 1. Its just the side branches on the far side left to prune this year prune

DSC00209.jpg.fcc7d8978dd0bc65f8ecf97d776e25cd.jpg

DSC00208.jpg.ef763b18553b0dec765694e11131c9c6.jpg

Link to comment
Share on other sites

Log in or register to remove this advert

Significant decay on that large pruning wound on the main stem. There is a new office complex just to the right of the photos.

 

The tree is laying down new wood, but the phased reduction is in the hope that we can get some weight out reduce stress. Its a very important tree in the local landscape

Link to comment
Share on other sites

Nice job & spec, any ideas on type of & culprit for the decay.

 

Gano/Fomes?

 

 

 

Do you have detail shot of the decay pocket?

 

Cheers

 

D

 

 

 

.

 

Phellinus robustus within the wound and a bit of tree chicken thats just come out. I suspect there are other agents at play too. I will get a shot if I remeber next week

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.