tw125 chipper problem

[otter]

Hi.

Before I take my chipper apart I thought I would ask. The problem is all works fine but ive got to keep the green/forward button pressed in all the time and when realead rollers stop.reverse works ok and anti stress kicks in sooner than usaul.

Any ideas?

Cheers

[Timberwolf Official]

Hello

This sounds like the forward latch relay is not holding in the on position.

Things to check are;

the relay itself, the spade terminals and crimps, all switches and the wiring condition.

 

Hope this helps

[otter]

Ok. Will check forward relay and conections now.

Ta.

[otter]

That might be it. Forward relay half hanging out and reverse loose.

Cant test it now as locked up in garage so fingers crossed and we shall see tomorrow morning.

Cheers timberwolf.

[otter]

OK, rollers working now, forward and reverse working (lose relays) but now anti stress is working overtime even on small branches? Chipped works great just anti stress

Seems to sensitive.

Any ideas?

[otter]

Any ideas why the no stress is working overtime, driving me mad. Takes for ever to chip anything??

[WoodED]

Any ideas why the no stress is working overtime, driving me mad. Takes for ever to chip anything??

 

 

Revs not picking up properly?

[White Noise]

Revs not picking up properly?

 

Yep I'll second that

[otter]

What would cause low revs then?

[WeFixIt]

Any ideas why the no stress is working overtime, driving me mad. Takes for ever to chip anything??

 

 

1. Check your air and fuel filters!

2. Check your throttle is traveling the full distance to the max rpm stop