Landy 90wiring

[Guss109]

Went to wire in the electrics today and the wiring is in a fair mess and some of the copper is going black. So to save any hassle later down the line I'm just going to change it out but was wondering if you can buy a short loom for just the back? Any help appreciated

[htb]

Hi craig,loom usedto run down inside chassis till it reached bulkhead where it emerged again on drivers side and plugged into bulkhead loom near the clutch pedal box. Do not be tempted to pull it out of chassis without attaching a draw string to get it back in(Pull from front). Chassis looms are available but at a price. You may be able to pull some slack out to rear to get enough to connect to good wire. Have fun

[Guss109]

Hi craig,loom usedto run down inside chassis till it reached bulkhead where it emerged again on drivers side and plugged into bulkhead loom near the clutch pedal box. Do not be tempted to pull it out of chassis without attaching a draw string to get it back in(Pull from front). Chassis looms are available but at a price. You may be able to pull some slack out to rear to get enough to connect to good wire. Have fun

 

 

I was afraid that it would be ran inside the chassis. I may as well do it properly tho as after my last experience with the tipper Its not worth bodging it up any more. The joys of motoring pass me the lighter please so I can burn more money 😂😂

[htb]

LAND ROVER DEFENDER 90 TD5 CHASSIS LOOM | eBay

LAND ROVER DEFENDER 90 TD5 CHASSIS LOOM | eBay

For your perusal

[woody paul]

My 90 has a 110 loom in chassis found it when rear cross member was replaced last year.

[Guss109]

That's not as bad as I expected will have a search online today if I get five mins. Guess it wouldn't make any difference if it was a 90 or 110 as they all have the same electrics