Forst tr6 on its way

[simonm]

It aint doing bad, last 2 days has being clearing trees around another building site, it honestly has smashed everything we have put through it, it breaks down unions for fun and just spits them out. We have slowed the rollers down so it isn't riving your hand off and it keeps 2 of us busy no probs. bad points there is a 1 pence clip under the coolant reservoir that drips coolant out "jubilee clip will sort that" engine was on tick over today and just stalled, had to turn it over a few times to get it going, think it was a bit of crap in the fuel line because its run fine since. This is redwoods hire machine and has had 135 hours of people throwing the biggest crappyist pieces of **** through and generally abusing it like every other hire machine and it has not put a foot wrong since we have had it. Cant wait for mine to come...i am getting used to this remote controlled 1 too much

 

If you are in the market for a new chipper i would defiantly look at 1.

[Johny Walker]

It aint doing bad, last 2 days has being clearing trees around another building site, it honestly has smashed everything we have put through it, it breaks down unions for fun and just spits them out. We have slowed the rollers down so it isn't riving your hand off and it keeps 2 of us busy no probs. bad points there is a 1 pence clip under the coolant reservoir that drips coolant out "jubilee clip will sort that" engine was on tick over today and just stalled, had to turn it over a few times to get it going, think it was a bit of crap in the fuel line because its run fine since. This is redwoods hire machine and has had 135 hours of people throwing the biggest crappyist pieces of **** through and generally abusing it like every other hire machine and it has not put a foot wrong since we have had it. Cant wait for mine to come...i am getting used to this remote controlled 1 too much

 

If you are in the market for a new chipper i would defiantly look at 1.

 

does it say what yr the chipper is

[simonm]

does it say what yr the chipper is

 

i think it does on the plate but i haven't took much notice, must be an early 1 as it has the black fuel tank. i will look tomorrow

[Johny Walker]

i think it does on the plate but i haven't took much notice, must be an early 1 as it has the black fuel tank. i will look tomorrow

 

cheers,wich bit of leeds you in

[simonm]

Actually in Wakefield

[Johny Walker]

Actually in Wakefield

 

tad far

[Johny Walker]

simon

 

hows the chipper fairing up

[Samraff88]

People keep mentioning this in feed speed...if its a problem it can be altered surely?

 

And surely the no stress will kick in to stop it??

Forst have built a great chipper. If the speed of the rollers was a problem and the bearing couldn't take it would they really let you turn them up to be so quick? A forst chipper would be my choice.