Interchangeable parts on ms 200 & ms 201

[wisewood]

I'm looking to get a 201 back handle and I'm trying to find out if the sprockets are the same as the 200.

I can find info on 1\4 sprockets for the 200 but nothing on the 201,

Anyone know whether they differ or do they share the same ?

Cheers,

Si

 

Sent from my Nexus 7 using Arbtalk mobile app

[Eddy_t]

1145 640 2051

[spudulike]

1145 640 2051

 

The most common sprocket for the MS200 is 6t 3/8th part code 1129 640 2000

 

Doesn't look good unless you have a big hammer:001_rolleyes:

[Eddy_t]

The most common sprocket for the MS200 is 6t 3/8th part code 1129 640 2000

 

 

 

Doesn't look good unless you have a big hammer:001_rolleyes:

 

 

Not following you there spud, that part no. was for the 201 1/4" sprocket assembly (with worm gear)

[wisewood]

Cheers Eddy

 

Sent from my Nexus 7 using Arbtalk mobile app

[wisewood]

The ms 200 one is 1129 640 2051 (with worm drive)

I guess as they have different part numbers they are not interchangeable, ah well will have to put that on to my shopping list :-)

 

Sent from my Nexus 7 using Arbtalk mobile app

[Eddy_t]

The ms 200 one is 1129 640 2051 (with worm drive)

I guess as they have different part numbers they are not interchangeable, ah well will have to put that on to my shopping list :-)

 

Sent from my Nexus 7 using Arbtalk mobile app

 

 

It's hard to tell if they're the same part number, some parts are given several numbers to stop people using old stock. Without physically trying to fit the parts, I couldn't say if there is a difference.

[wisewood]

It's hard to tell if they're the same part number, some parts are given several numbers to stop people using old stock. Without physically trying to fit the parts, I couldn't say if there is a difference.

 

Does anyone know if the standard 3\8 sprocket fits both saws?

As that's more common some of you guys may well have already tried them. Think I'll just phone a dealer up and see if he can compare them for any differences. I would have thought they'd be the same like you say just altering some of the part number might not mean there's any actual physical difference.

 

Sent from my Nexus 7 using Arbtalk mobile app

[Eddy_t]

Does anyone know if the standard 3\8 sprocket fits both saws?

As that's more common some of you guys may well have already tried them. Think I'll just phone a dealer up and see if he can compare them for any differences. I would have thought they'd be the same like you say just altering some of the part number might not mean there's any actual physical difference.

 

Sent from my Nexus 7 using Arbtalk mobile app

 

 

I would imagine that they would, only the first 4 digits differ, I also know the drum off an 009 fits the 200t

[spudulike]

Not following you there spud, that part no. was for the 201 1/4" sprocket assembly (with worm gear)

 

Wisewood was asking if the sprockets for the 201 and 200 were the same - you put up the 201 part and I put up the 200 showing they were different!

 

Are you following now:lol: