Jump to content

Log in or register to remove this advert

MF 390 12/12 gear selector problem.


cessna
 Share

Recommended Posts

Log in or register to remove this advert

Has anyone had experience of changing the gear selector spring,on MF390 12/12 Shuttle gearbox,I believe it is big job,and that is putting it mildly,as the gearbox has to be stripped down!!!!

 

HI MATE ASK GARDEN KIT he may no but im told there a night mere job thats why i did not buy a 12/12 gear box thanks jon :thumbup:

Link to comment
Share on other sites

Has anyone had experience of changing the gear selector spring,on MF390 12/12 Shuttle gearbox,I believe it is big job,and that is putting it mildly,as the gearbox has to be stripped down!!!!

 

Big job alright, to put in a spring that costs a few quid!

 

Tractor has to be split anyway, if the clutch etc is anyway worn, change it while you are at it.

Link to comment
Share on other sites

I trained at a MF dealers and worked on many 300 series tractors. I agree if the tractor is split check the clutch, flywheel, spigot and release bearings for wear. On the 12/12 shuttle model there is a cam plate which is operated by the forward / reverse lever, on the cam plate there is a roll pin that can sometimes break if this breaks you obviously loose your ability to move forward and backwards. I went on a MF training course at Stoneleigh for the 300 series and still have the work books for the model, so if you need a particular bit I'll look out the book and I could scan it off for you. Bearing in mind its been 20yrs since doing the course and have not worked on one for 15yrs so I'm a bit rusty :lol:

Link to comment
Share on other sites

  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.