395xp husqvarna with 30"bar it stihl 660 with 30"bar

[jnoon]

HI MATE IN 17MINS to a tanks thats lot of rings mate on a good chain thanks jon

 

 

Yh new chain jon,

[mendiplogs]

Yh new chain jon,

 

HI MATE BUT IN 17mins you can ring up LONG BUTT IN THAT TIME MY 880 GOOD ON FUEL FOR WHAT WORK IT DOES THANKS JON

[sawfun]

Much lower vibes on the 395 as it has spring AV. More power and balances much better with a 36" lightweight bar. Sold my 066 for those reasons.

[mendiplogs]

Much lower vibes on the 395 as it has spring AV. More power and balances much better with a 36" lightweight bar. Sold my 066 for those reasons.

 

HI MATE he goes right taken of husky uk site 395xp VIBS FRONT 6,5MS//REAR 10,2 MS REAR HANDLE MS660 STIHL UK SITE FRONT 7MS REAR 7MS SO THE MS 660 IS LOADS BETTER ON VIBS THE 880 IS 8.9MS FRONT// REAR 8.9MS THANKS JON

[Stubby]

I have a twin port 395 on a 36" .404 . Cant say I notice any excessive vibes ? Cut pretty good on that set up so should fly on a 28/30 .375 set up ...

[wisecobandit]

Another one here for the 395.

Like stubby I run .404 on 36" and 28/30" on 3/8 and no complaints on vibes.

 

Tadge more power than the 660 and responds better to mods in my eyes to the 660.

Also the oiler is much better. You never hear of shortage of oiling on the 395 whereas the 660 isn't uncommon.

 

One day Jon we will catch up, we can put my 394 and 395 against your 660.

[mendiplogs]

Another one here for the 395.

Like stubby I run .404 on 36" and 28/30" on 3/8 and no complaints on vibes.

 

Tadge more power than the 660 and responds better to mods in my eyes to the 660.

Also the oiler is much better. You never hear of shortage of oiling on the 395 whereas the 660 isn't uncommon.

 

One day Jon we will catch up, we can put my 394 and 395 against your 660.

 

HI WISE i will have ms661 remaped OR A TIMBER SPORT 660 THANKS JON

[wisecobandit]

HI WISE i will have ms661 remaped OR A TIMBER SPORT 660 THANKS JON

 

Be interesting to see mate.

I may have a box of 394 bits coming - most of the saw supposedly so im already tempted to rebuild it and work some magic into it

[mendiplogs]

Be interesting to see mate.

I may have a box of 394 bits coming - most of the saw supposedly so im already tempted to rebuild it and work some magic into it

 

HI WISE we will SEE BUT MY 660 ONLY 4 WEEKS OLD SO NOT GOING TO PORT IT YET 661 THEN THANKS JON

[wisecobandit]

HI WISE we will SEE BUT MY 660 ONLY 4 WEEKS OLD SO NOT GOING TO PORT IT YET 661 THEN THANKS JON

Lol ive still got a brand new 395 in box unused, ive only got around to porting the muffler not even fired up to check the carb tuning yet as was going to port it etc but the way its going that will take another 6 months lol