saw porting

[wrsni]

I don't personally piss around with polishing, there is a limit to how much you can do without getting fanatical and obsessive about it shaving a tenth of a second off a cut - I have ben there:001_rolleyes:

 

I know, but I wanted to leave him something to be at!

[wyk]

I've read in a few porting guides that a polished surface causes the mixture to shear as the fuel starts to stick to the intake tract, causing the oil to separate before reaching the case.

[mixedangased]

I'd go to the AS site and look up masterminds threads and the porting 101 threads before you tear in to a jug like a 254xp. He does start to finish porting walk-throughs.

 

as site ?

[spudulike]

as site ?

 

http://www.arboristsite.com - over the water:001_rolleyes:

[shavey]

here is an muffler for a dolmar 7900 / 7910 i was wondering what you guys thought

[spudulike]

here is an muffler for a dolmar 7900 / 7910 i was wondering what you guys thought

 

That looks like one of the ones Stubby has fitted to his 390XP and 372XP, damn loud, the neighbours loved it:001_rolleyes:

[shavey]

perfect i think the gases should expell out of this pipe ok help the performance a bit :thumbup:

[mixedangased]

http://www.arboristsite.com - over the water:001_rolleyes:

 

ta spud,be interested to see what you did to the254 you tuned

[spudulike]

ta spud,be interested to see what you did to the254 you tuned

 

Widened the inlet and exhaust ports and opened up the piston windows then opened up the air filter union:thumbup:

[mixedangased]

Widened the inlet and exhaust ports and opened up the piston windows then opened up the air filter union:thumbup:

 

nice

might just have to send you mine,

would you want the whole saw or just piston and cyl ?.

i have 3 x 254 xp`s so would`nt miss 1