201t handle assembly

[Rodeodog]

Merry Christmas to everyone. My 201 has decided to not stop revving recently, so I thought I would have a crack at opening the handle/trigger unit myself to try and fix the problem! Trouble is as I opened it all the bits flew out and now can't for the life of me put the thing back together!! Diagrams or help would be awesome:)

[Dan Earp]

Lol i did the same when i had to change the plastic trigger.

 

What i did was only up the 2nd saw more carefully and worked from there.

Thats if you have a 2nd saw.

 

Merry christmas though bud

[Stephen Blair]

Join the club, my stop button wouldn't go forward and then I took it apart and kaboom!!

2 folk tried and it's still didn't work, so I sent it to Jonesie andit came back lovely and never a problem since.

[MWArb]

I have a photo of the handle assemble before I took it apart for that reason.. I'll dig it out and post it shortly

[Rodeodog]

Well it's good that I'm not the only one that has had this problem!! Unfortunately I don't have a 2nd saw to take apart more carefully. That pic would be great. Thanks chaps.

[MWArb]

Lets see if this works.. This should help :thumbup:

[Rodeodog]

Awesome thanks very much.

[Timbermcpherson]

heres a pic from the other side

 

http://www.brickshelf.com/gallery/aeh/Killough/a.jpg

[CJM]

It's the throttle linkage on the carb that's a pig to fit, if you take it off or it drops off warn your missus that she'll be hearing lots of profanities for the next 30 mins haha