Milling Job - Fareham, Hants

[agg221]

Oak, as per image. The section for milling will be 10ft long, and you can drive right up to it. Looks like a metal detector would be advisable, but otherwise should be a simple half day job.

 

Not sure on the cutting spec, and I reckon from the picture that the tree is more like 2ft than 1ft across.

 

If interested, please contact Steve on 07966572998

Edited October 10, 2013 by agg221

[Rob D]

Just to update this thread:

 

 

The tree is coming down on the 22nd Oct and so the butt will be ready for milling.

 

 

The owner Steve has said he is happy to pay £300-00 for the milling - a good job for someone so get in touch!

 

 

 

[agg221]

Have confirmed the milling spec.

 

It's 33" at the base (so I would guess around 28" at the top) and needs to be milled through and through into 2" boards.

 

Alec

[Big J]

"Sings to self - Nana nana nana nana Hidden Metal!"

 

Nice little job but I reckon I'd want to have a metal strike contingency on the job!

[Big Beech]

Ok. Might giv a ring then