Jump to content

Log in or register to remove this advert

current setup... lets see yours! RW


Recommended Posts

Log in or register to remove this advert

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Way much sitback on the hitch in that first photo. I dont have a picture but I use a super short hitch, sometimes spliced which makes the legs stiffer so a VT with minimal sitback got a 72/3cm spliced AP with a 3/3vt and a 70cm HRC with a 3/2vt. All off one petzl willam biner with a fixed isc or hitchclimber. Little throwline loop on the bottom of the wrench tether to tend/clip into the HC. Or just use the Uni :D

 

Edit: the new setup looks mega. I destroyed OP with a knut pretty quick though. Burns up at the half hitch in the knut.

Link to comment
Share on other sites

Got some gear there lad! Which do you prefer out of the three? Not had a go on the uni yet. You have a barrel component? Yh im switching it around, making sure im trying to spread the wear rather than let one spot get bad. Also switching to and from vt. It depends on the weather really to what hitch I go for.. also vt on hh?

Link to comment
Share on other sites

Does anyone still use just a plain old loop wrapped round your rope a couple of times method or am I the only one?? I look at your fancy thingmabobs with different length whatdyoucallems and I'm lost in the nicest possible way!!??:thumbup:

 

Haha, is you prussik loop just on a double line system? You should have a play with some gear, its defo hard to get used to at first but change is good! Watch some videos on all the different systems out there to get an idea. :thumbup1:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.