Chainsaw carvers Oregon full feature carving chain 25F

[Rob D]

A new (well new to these shores anyway!) carving chain from oregon for the chainsaw carvers out there. Have been trying to get this for a while from Baileys but no joy - suddenly there were a couple of 25ft rolls here in the UK!

 

 

Not used it yet but apparently it is excellent for fine detail and finishing work. Instead of having a space between each cutter you have a continuous sequence of cutters (as in pic below).

 

 

Available to buy in custom loops here Custom chain loops

 

1/4" is labelled as .250 - this is because the "/" symbol interferes with coding on the site.

 

 

This is in addition to their unguarded 25A carving chain.

 

 

Oregon have also brought out a whole range of new 1/4" drive sprockets for Stihl, Husky and Echo chainsaws as it can be a right pain trying to find these from a dealer.

 

You can download the pdf here http://www.oregonproducts.com/pdfs/Sculptor_A107046-AC_lo-res.pdf

 

 

So for a change hats off to oregon for making something simpler and providing a larger range for the pro user. I will be uploading all the new sprockets to the website later this evening (will try anyway ).

 

 

[Coletti]

Excellent, will be ordering a sprocket for an echo as soon as possible , well pleased

 

 

Sent using Arbtalk Mobile App

[Rob D]

No worrys - I think oregon have done really well here by making the 1/4" sprockets easier to get hold of.

 

 

[Woodcrafter]

I'll give 1 a go!

Pain in the rear if you hit a nail though lol.

[wisewood]

Great, been after some full house for ages

[Coletti]

Any ideas when the sprockets will be available for purchase rob?

 

 

Sent using Arbtalk Mobile App

[Rob D]

I think I have most of them - just trying to get time to get pics and get them listed - but which one is it you're after i.e. what echo do you have?

 

 

Send me a PM as I sometimes only check threads every few days.

 

[pulsar46]

Got one for the echo 2700ES Rob?

 

I think I have most of them - just trying to get time to get pics and get them listed - but which one is it you're after i.e. what echo do you have?

 

 

Send me a PM as I sometimes only check threads every few days.

 

[Rob D]

There isn't one listed in the leaflet....

 

 

I will try and find out.

[NorfolknGood]

The .pdf file says "*WARNING: Failure to use this chain on bars with nose radii of 12mm or smaller can result in severe kickback".

 

No good on the standard rollmatic bar then I still dont like loose chains.