Jump to content

Log in or register to remove this advert

carburetter advise please


wayne 4098
 Share

Recommended Posts

Log in or register to remove this advert

Hi leaking from top hole.Both of what spud mentioned looked ok with no rips.Bought a repair kit but not fitted yet.Sprayed carb cleaner through all holes etc.Didnt see any spray coming from one of holes behind choke bit.Is there any solvent u can soak carb in.Dont no how to unblock the other bit.Thanks

Link to comment
Share on other sites

Hi leaking from top hole.Both of what spud mentioned looked ok with no rips.Bought a repair kit but not fitted yet.Sprayed carb cleaner through all holes etc.Didnt see any spray coming from one of holes behind choke bit.Is there any solvent u can soak carb in.Dont no how to unblock the other bit.Thanks

 

Do are you saying that you have removed the H&L screws and sprayed carb cleaner down them?

 

If so you should get a stream from the holes just under the throttle valve spraying in to the L screw and a jet out of the brass check valve just behind the choke spraying in to the H screw hole!

Link to comment
Share on other sites

Hi yes just as u described spud but could only see it spraying out of 1 place .Is there any other way of clearing it?Tried with compressed air as well.Thanks

 

I use a heated ultrasonic cleaner with specific carb cleaner, an hour in that generally cleans carbs pretty thoroughly!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.