Purpose Built Forwarder Thread (OSA, FMG/Bruunett, Entracon, Norcar/Logset etc)

[County 764]

the seat sensor is under the bottom of seat a little fidley to reach! with the ignition on when you join the 2 wires together you should hear a click noise,and all functions should work once started. il try to find our workshop manual for 840!

 

i just remembered make sure the yellow switch with ehc on it is in the right poisition,

switch pushed up/ no steering by mini lever only steering wheel (for road use)

pushed in middle/ no working brake (load brake)

at bottom/ load braking and mini lever steering.

its the rotator function that does the steering.

 

Good stuff, will mind and look at that switch, which I didn't know about so thanks again

[EddieT]

Hi Folks, not too sure if this is the right place but, I am selling my Osa 250 harvester. Keto 100 head, Tracks front and back, urea treatment system, front mounted winch and blade. Very good condition, excellent set up for hardwoods, 1st and 2nd thinnings. Can be seen working, no reasonable offer refused.

[TimberCutterDartmoor]

Hi Folks, not too sure if this is the right place but, I am selling my Osa 250 harvester. Keto 100 head, Tracks front and back, urea treatment system, front mounted winch and blade. Very good condition, excellent set up for hardwoods, 1st and 2nd thinnings. Can be seen working, no reasonable offer refused.

 

Crike that's a machine! Never seen a winch on un either.

[EddieT]

Haha, yea fitted it myself for getting the hard to reach oversize timber.

[jmac]

Is this the chain tensioner on the rear bogie of an osa 260? And is this its tightest position?

[EddieT]

Yes and yes..

[County 764]

i just remembered make sure the yellow switch with ehc on it is in the right poisition,

switch pushed up/ no steering by mini lever only steering wheel (for road use)

pushed in middle/ no working brake (load brake)

at bottom/ load braking and mini lever steering.

its the rotator function that does the steering.

 

That's the 840 back at home just removed the old filters and ordered a 1000 hour service kit of Komatsu.

 

Quick question, which switch is it that works the EHC not moved it far but can't find which one it is.

 

I see there's an EHC light next to the steering wheel.

 

Thanks

[gm valmet]

it should be the yellow switch on the top row,if its in poisition it is in picture its in road mode and can only be steered by steering wheel.try switch right down and the ehc light by steering wheel should be lit. hopefully thats the problem. gareth

[County 764]

it should be the yellow switch on the top row,if its in poisition it is in picture its in road mode and can only be steered by steering wheel.try switch right down and the ehc light by steering wheel should be lit. hopefully thats the problem. gareth

 

Thanks, will hopefully get to it over the weekend.

 

Cheers

Mark

[County 764]

Hi all, is anyone able to point me in the correct direction in finding the filling plug for the front diff on a Valmet 840, The manual is hopeless!

 

Can't get to it from underneath and all this lot is above it plus a thick steel plate, I can only just see the dipstick and its to tight to reach.

 

Also Can't locate items 9 & 10 on the below diagram

 

Thanks