Jump to content

Log in or register to remove this advert

Riko fast tow trailer & crane


treedave
 Share

Recommended Posts

I'm looking at getting one of the above, have had some info from Chris Shep but I could do with some 2nd opinions / first hand experience. Any info / opinions welcome.

Anyone in t'north got one that I could look at in the tin?

Ta

Dave

 

http://www.alpinetractors.com/forestry.htm

Edited by treedave
Link to comment
Share on other sites

Log in or register to remove this advert

and why 3200kg not 3500kg?

 

A fair point - let me explain;

 

To keep the nose weight of the trailer to a legal level whether loaded or unloaded, the body of the trailer slides forward or backwards independantly of the axles and drawbar using a hydraulic cylinder. To be able to do this the drawbar is constructed from a large piece of box section rather than an A frame and the largest capacity hitch available in this fitting is 3200kg. All the extra steel involved to build the trailer to have an A frame drawbar and still allow it to slide far enough would eat a long way into the 300kg extra gross weight and also add further to the nose weight.

 

The original fast tows were built as a way of transporting a compact tractor to the woods and then being able to forward timber too without needing two trailers or making two trips to the wood and back eack time (one for the tractor and one for the trailer) and depending on the exact spec of the trailer and what crane is chosen, the carrying capacity on the road is typically around 2000kg - enough to carry most compact tractors. :001_cool:

Link to comment
Share on other sites

A fair point - let me explain;

 

To keep the nose weight of the trailer to a legal level whether loaded or unloaded, the body of the trailer slides forward or backwards independantly of the axles and drawbar using a hydraulic cylinder. To be able to do this the drawbar is constructed from a large piece of box section rather than an A frame and the largest capacity hitch available in this fitting is 3200kg. All the extra steel involved to build the trailer to have an A frame drawbar and still allow it to slide far enough would eat a long way into the 300kg extra gross weight and also add further to the nose weight.

 

The original fast tows were built as a way of transporting a compact tractor to the woods and then being able to forward timber too without needing two trailers or making two trips to the wood and back eack time (one for the tractor and one for the trailer) and depending on the exact spec of the trailer and what crane is chosen, the carrying capacity on the road is typically around 2000kg - enough to carry most compact tractors. :001_cool:

 

Iv'e seen them in the flesh mate, they are well built, Steve a Riko built me a grapple........

Link to comment
Share on other sites

tried it, tested it, used it, abused it.

does what it says on the tin.

if putting a tractor on the trailer, then make sure the ramps are secured properly, they have a habit of vibrating off when tractor is on top side of trailer,

riko did modify that to stop it happening.

 

all in all very good for what it is designed for

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

how much commision did you say for a good review?????

Link to comment
Share on other sites

Only a fool would design or use a trailer with over-run brakes for forestry or off-road activity ware load is carried on anything but flat ground, if you fail getting up a slope forwards then only the brakes on the towing unit will work as gravity & the auto reverse brakes will take over on the trailer pulling you down the slope.

Link to comment
Share on other sites

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.