Jump to content

Log in or register to remove this advert

2%mc oak . Not!


brewpup
 Share

Recommended Posts

Had a machine cut off cut of oak 18 inches x4x9 from a church restoration job. I sat it behind woodburner which runs 24 /7 for 4 weeks . Today keen to see results I took mc on it wow 2% on end grain 4 on face.cut with cross cut saw and still as wet as an otters pocket 38 %mc .and it was still 20% about 10 mm from edge.does it need air circulation rather than heat

Link to comment
Share on other sites

Log in or register to remove this advert

Had a machine cut off cut of oak 18 inches x4x9 from a church restoration job. I sat it behind woodburner which runs 24 /7 for 4 weeks . Today keen to see results I took mc on it wow 2% on end grain 4 on face.cut with cross cut saw and still as wet as an otters pocket 38 %mc .and it was still 20% about 10 mm from edge.does it need air circulation rather than heat

 

Yep needs a bit of wind . Cold wiond is better than warm sun and bno wind . What it was doing was " sweating " behind your stove . It would have worked in the end but its psychological thing . You tjhink putting it near the stove will dry it quick . Putting it out in the air but not the rain will dry it well but cos its away from you and you are not staring at it it seems to work better .....me thinks !

Link to comment
Share on other sites

I'm surprised at that result. My Esse stove gets wood to about 100c sitting on top, unlike clearview and others that are too hot and char it. I can dry 10inch hardwood logs from 51% to 20% in four days on the top (measured properly by weight not a moisture meter). To be fair I've not tried oak.

Link to comment
Share on other sites

Yes I suppose it is moisture going into the room. But with dry central heating and problems from that, a few grams of water a day is quite a good idea. I dry 9 logs at a time and have done it all winter with no problems. Drying a small number quickly doesn't seem to be a problem.

Link to comment
Share on other sites

"I can dry 10inch hardwood logs from 51% to 20% in four days on the top"

 

Sorry if this is a daft question, but ... isn't that moisture going into the room, and potentially causing a condensation problem? i.e. is it actually good practice to dry logs inside?

 

They sell humidifiers in stove shops because they dry the air out too much I believe

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.