Jump to content

Log in or register to remove this advert

Recommended Posts

Log in or register to remove this advert

Posted

Nice little fast tow low impact machine. Get away with towing it on a 3.5t trailer. Even has a little winch on it for skidding. Bet it'll get places an alpine and trailer wont go too.

Posted

Very slow (12HP 2 cyl), and you will get fed up of the lack of visibility (mechanical drive so not easy to turn seat and controls round)

 

If the undercarriage is OK then it's viable. The sprockets don't look the best and the tracks are clearly not tensioned properly. Hard to get spares for. It's based upon a Kuboto RC20, and I can't find much information about them on the net.

 

However, with the value of the crane and the fact that it looks to be a half decent conversion I'd say it was worth at least 3k and would not be surprised to see it fetch more.

Posted

I just finished a job for Truck on here and i would have killed to have this thing for the week!! It was a woodland covering a victorian water treatment works. A big reed bed on the side of a hill, mega soft!! He's gonna have to wait till the height of summer to get the timber out. Get it bought Laurie :):):)

Posted
I just finished a job for Truck on here and i would have killed to have this thing for the week!! It was a woodland covering a victorian water treatment works. A big reed bed on the side of a hill, mega soft!! He's gonna have to wait till the height of summer to get the timber out. Get it bought Laurie :):):)

 

Unless you have a lot of ongoing works for such a specialist vehicle then I would say you'd be more cost efective to hire a tracked dumper and a little digger with a grab to load- you can always unload by tipping, which is what I do with my setup.

 

Don't underestimate how slow these things are- when loaded unless it's downhill or perfectly flat and not soft underfoot you'll be in 2nd all the time, which is less than walking speed.

Posted
Unless you have a lot of ongoing works for such a specialist vehicle then I would say you'd be more cost efective to hire a tracked dumper and a little digger with a grab to load- you can always unload by tipping, which is what I do with my setup.

 

Don't underestimate how slow these things are- when loaded unless it's downhill or perfectly flat and not soft underfoot you'll be in 2nd all the time, which is less than walking speed.

 

Yeah point taken, it's never going to meet any acceptable levels of production but it is still very cool:001_smile::001_smile:

Posted

Thats what i thought!! I've been watching it too lol Your right though there was a newer dumper with controls the right way round,4 speed box and a honda diesel engine and that fetched just over 2k.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.