Husqvarna 61 (orange top) coil

[Eddy_t]

544018401 - that's the part number you want

[Albion John]

Hi and apologies for not finishing what I started.

We have had other stuff to deal with like the death of my father-in-law. Comes to us all, I guess.

 

Anyway - effusive thanks to everyone who helped with their time and advice. Special thanks to Bob who's advice on gap distance solved it today when the trusty Husky 61 roared back into life and logged up a good tonne of beech. Brilliant.

 

Cheers, John

Edited January 29, 2013 by Albion John
typo

[spudulike]

Hi and apologies for not finishing what I started.

We have had other stuff to deal with like the death of my father-in-law. Comes to us all, I guess.

 

Anyway - effusive thanks to everyone who helped with their time and advice. Special thanks to Bob who's advice on gap distance solved it today when the trusty Husky 61 roared back into life and logged up a good tonne of beech. Brilliant.

 

Cheers, John

 

Glad you got it going, think I mentioned the coil to flywheel gap in one of the posts on the first page of this thread and don't know what comms you have had with Bob not wanting to take his glory if he advised the same but anyway...the saw is running and that is what really matters:thumbup:

[Albion John]

Spud - yep, thanks too. The advice on this forum sorted it - amazing that just narrowing the gap by a few thou. makes the difference.

[spudulike]

Spud - yep, thanks too. The advice on this forum sorted it - amazing that just narrowing the gap by a few thou. makes the difference.

 

Got a 268 once as a non runner - five minutes later I had trippled its value by moving the coil - it may be that the flywheel has just lost a little magnetism but it does the trick and if the saw works - that is what counts:thumbup: