Non turnable to turnable

[caveman]

Is it difficult to change a PTO tractor chipper non turnable to a turnable one?

 

 

Thanks in advance

[Mr Ed]

Excedingly difficult. Have'nt time to explain, suffice to say it would be cheaper to buy a turntable pto chipper from scratch than to convert one.

[PeteB]

Do that, buy one istead of wasting time and money trying to convert.

[treequip]

Such things are possible but as others have said, it’s problematic and can be expensive. You would have to be an engineer who relished a challenge.

 

Why do you want to change it?

[caveman]

Such things are possible but as others have said, it’s problematic and can be expensive. You would have to be an engineer who relished a challenge.

 

Why do you want to change it?

 

 

Then can y leave my chipper and lorry on the tractor, when i have no space like on a driveway, and chip without disconnect the lorry.

[Mr Ed]

Then can y leave my chipper and lorry on the tractor, when i have no space like on a driveway, and chip without disconnect the lorry.

 

Better to run a PTO shaft underneath your trailer and fit the chipper to the rear of your trailer.

[treequip]

BTDT

Fit the PTO under the bed of a 3 way tipper then ballast the front with a small crane.

 

Andy

[bob]

buy 3 chippers

1 for the front

1 in the middle

1 behind

[caveman]

BTDT

Fit the PTO under the bed of a 3 way tipper then ballast the front with a small crane.

 

Andy

 

 

I allready have a crane, mounted on the back of my MB-trac.

 

@Mr Ed, I thought of that idea but my trailer is not a 3 way tipper and my chipper is a 3 point linkage.

So I have to demount the chipper from the trailer to tipping the chippings.

Edited November 23, 2008 by caveman

[Mr Ed]

What chipper do you have?