Jump to content

Log in or register to remove this advert

Help regarding mog gears.


mdt
 Share

Recommended Posts

Today coming back home I lost my top 4 gears, about a month ago I lost my bottom 4 gears but no idea how got them back. Any ideas to what the problem is? It's a 8speed in a u1000. It's rather painful travelling at 15mph wen it can do 50mph. Tia

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 25
  • Created
  • Last Reply

Top Posters In This Topic

we had the same thing in our u2100. The problem was the air valve on the back/top of the gearbox. Ithad seized, so you couldn't change between the high and low boxes (1-4 & 5-8) cheap part and easy enough to fit......if you can get in between the chassis/pto shaft/rear drive shaft! I nearly couldn't get out again!

Link to comment
Share on other sites

No don't think can hear a hiss. Have plenty of air pressure though. Is it the box on the top of gearbox?

 

On ours it's on the nearside rear top corner of the gearbox. I think it's held in by four 14mm bolts and has a 3 or 4mm plastic air line into it. Ours has a push fit joint in that air line. I think I had to take something else off to get to it, but I can't remember what

Link to comment
Share on other sites

every now and then mine does it, usually when i pull away without max air pressure. i just stop and sit with it in neutral and flick the lever side to side til you can hear the hiss of the ram.

 

yep nothing better than finding a box fuel of neutrals, just as you'v pulled on to a bizy road :thumbdown:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.