Stump grinder Teeth

[Lee Winger]

Sharpen your own ,or send them away to be done,me i'm scared to death of the dust from green wheels..

[Mr Ed]

I use to retipp my rayco superteeth. Braze on new tips, good as new.

[Pete Mctree]

Do them yourself Lee. Get a decent mask and just fire up the workshop vac right next to the wheel if you are worried

[Mike]

We use an 8" resin bonded diamond wheel on an 8" bench grinder. Cost about £250 but has done hundreds of teeth of all kinds and shows very little sign of wear. There is dust but it is minimal and with a dust mask on is safe.

[Lee Winger]

Where did you get your diamond wheel and grinder from Mike?

[Mike]

Where did you get your diamond wheel and grinder from Mike?

 

Not too sure. Steve's project. I look at the invoices and let you know. Grider itself is just a Sealey 8". It's the wheel that's special. I know it took him weeks to source.

[A_lopa]

I will send you a wheel Rolla,I refurb mine at $3 a tooth.

[Lee Winger]

I will send you a wheel Rolla,I refurb mine at $3 a tooth.

 

cheers mate..

[treediver]

I use a green wheel and also a 4.5 inch diamond covered wheel on my angle-grinder so I dont have to take the teeth off to be sharpened ..and used with a small generator can quickly sharpen the teeth on site when they get abit dull.

[A_lopa]

Im buying new tips for $2 a peice so i only sharpen the carbide then re-tip.