Stihl EZ file

[WorcsWuss]

Done!

[Rob D]

Some more info on the Stihl EZ file system.

 

Really the system will only accept Stihl files.

 

But bear in mind it comes in 4mm, 4.8mm and 5.2mm only.

 

I do have some pferd EZ files in 5.5mm for .404 chain but normal files do not fit in this one (perhaps why Stihl do not do a 5.5mm one as I'm pretty sure pferd make these for Stihl).

 

It also says below only for .325 and 3/8 chain but there is another 4.0mm EZ file for 3/8 lo pro or picco chain.

 

Product sheet on EZ file :

[timberbear]

I'm a convert, bought the three different pitch sizes. They are great to use out on site especially when using a log vice. Haven't found a supplier for the centre flat file yet.

[slasherscot]

rob..... it seems Oregon 5.5mm files are fatter than pferd 5.5mm files........both are the same length........you would have thought both would have fitted the pferd CS X.

 

I have the csx.....tried an Oregon in it but the holes are too small, not by much, I suppose easy enough to fix if u prefer Oregon.

[Rob D]

rob..... it seems Oregon 5.5mm files are fatter than pferd 5.5mm files........both are the same length........you would have thought both would have fitted the pferd CS X.

 

I have the csx.....tried an Oregon in it but the holes are too small, not by much, I suppose easy enough to fix if u prefer Oregon.

 

 

Yep they are slightly different size - Pferd seem to make most but prob not all Stihl files - as you said you can always adapt the holes to take the oregon ones.

 

 

I have the replacement flat files for them here Products for the category: EZ file