Jump to content

Log in or register to remove this advert

Recommended Posts

Log in or register to remove this advert

Posted

Another busy day - MS200T finished, chain brake assembly overhauled to finish the rebuild.

 

MS660 - put it back together, pulls 150psi when mildly warm so happy with that, got a muffler mod that should liven it up a little - all good, no fault found on pressure and vac tests, carb good, tank breather good and carb settings as they should be - no idea why it seized but all OK now!

 

Pictured is the MS180 oiler pinion that was shagged - the arm on the old one revolves around the worm drive very easily - all good now - oil tank flushed out as it was pretty gloopy.

 

Ported 357XP had a crank seal leak - seal now replaced and perfect!

DSCF0809.jpg.c7e24e7ab213364446a2945cac66692a.jpg

DSCF0806.jpg.6777bb4af059953aa923c5bf8b1ece40.jpg

Posted
For some reason it comes out on my saws or when I'm about lol

 

Seems to:lol: the vacuum and pressure check were perfect, unusual for a 357XP but it is now spot on, just got to put the clutch on and find a bar for it!

Posted

From one tool to another...

 

Sussex Groundie wins the title of "top techie" for today.

 

It is in fact a Briggs and Stratton tool for levering 1/4" fuel hose from hose tails on tanks, carbs, taps and filters.

 

So much better than messing around with pliers and flat screwdrivers.

 

Part number 19600 @ just under £6.00 plus vat, available through any good Briggs dealer.

P1000030.jpg.efb08db1253b946d90a8e5f3ff033a97.jpg

 

P1000031.jpg.f647078a42339d4a24873b8dd5934f83.jpg

 

P1000032.jpg.37fcae1a05e992611a15da3b544dddd5.jpg

 

P1000033.jpg.924b7ebbbd26ed801b0c3a9e0e269d94.jpg

Posted
From one tool to another...

 

Sussex Groundie wins the title of "top techie" for today.

 

It is in fact a Briggs and Stratton tool for levering 1/4" fuel hose from hose tails on tanks, carbs, taps and filters.

 

So much better than messing around with pliers and flat screwdrivers.

 

Part number 19600 @ just under £6.00 plus vat, available through any good Briggs dealer.

[ATTACH]126040[/ATTACH]

 

[ATTACH]126041[/ATTACH]

 

[ATTACH]126042[/ATTACH]

 

[ATTACH]126043[/ATTACH]

 

And you can stir your tea with it:thumbup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.