Hedge cutting head on ht131???

[SAM66S]

Ive already got a ht131 & am now looking into getting a long reach hedge cutter. Will the hedge cutting head fit onto the pole pruner ok or am i best to get a hl100 or a kombi unit with hedge cutter attachment? I would be interested to hear from any one who has done this & any problems you have had with it? Thanks

[Nick Gardiner]

Good question will be interested to know this as well, would make life a lot easier if it can be done,

 

 

---

I am here: http://maps.google.com/maps?ll=52.108579,-8.206177

Sent from my iPhone using Tapatalk

[bob]

officially no

it is a hse issue as not designed ect

also the drive is not strong enough

 

it does work:thumbup: but would not run it long term and expect shaft issues if you do

[oldwoodcutter]

My stihl dealer advised against putting a hedger on the end of my ht101,as the reciprocating movement causes premature wear [he said]. I use a kombi unit with long reach trimmer and an extra 1 metre extension for clipping off those high whiskers.Prefer my tripod though,but you havnt always got the room to use it.Hope this helps.

[Pat Ferrett]

If you just buy the head and use it with the pole saw you ll be able to do 5 minutes tops unless you have an ELH, so buy the Hl100 and then just swap the heads over for the hard to reach areas.

I have used the pole saw with a hedge cutter head for years with out any problems.

[SAM66S]

if you just buy the head and use it with the pole saw you ll be able to do 5 minutes tops unless you have an elh, so buy the hl100 and then just swap the heads over for the hard to reach areas.

I have used the pole saw with a hedge cutter head for years with out any problems.

 

elh???

[tractorboy1]

elh???

 

http://arbtalk.co.uk/forum/general-chat/33376-easy-lift-harness.html

[Pat Ferrett]

saves alot of ladder work