Your treemotion setup

[Lancstree]

Just curious to know how other people have set up their treemotion harness. I've only climbed in mine twice and still have a lot of playing around and adjusting to do, but so far so good. I like to hang my MS200 from the left side so have temporarily put a carabiner through the leather to snap onto. Got my silky on a little elastic loop that is supplied. Pic to follow

[swinny]

i still put the 200t into the saw ring at the back but i have a crab at each side of my hip so i can just pull the saw up and clip it up whilst moving around..... then i just clip all the rest of my gear to them red straps at the back (tape slings etc)

[Lancstree]

I hang my saw in the same way. When putting the crab on the side do you thread it through just the leather or round the webbing also? I'll show what I mean in a pic

[swinny]

I hang my saw in the same way. When putting the crab on the side do you thread it through just the leather or round the webbing also? I'll show what I mean in a pic

 

i'll have to have a look, probabilly just the leather as theyre very tight to get in!!

[Lancstree]

Sorry about the angle

[swinny]

same as mine

[Rupe]

That bit of leather is designed to take a petzl caritool.

[Theocus]

As Rupe said use a caritool. One handed in and out.

[Old Mill Tree Care]

Caritool (large) is defo the way forward. Takes about 10mins to master the one handed technique.

[Rupe]

Although I think its the small one that fits in that slot the best, but not tried the large one.