Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Whilst at one of our woodlands removing holly and silver birch i found a nice peice of Holly with some honeysuckle growing out of the top of it. As i removed the side branches i found a nice twist caused by the honeysuckle and promptly put it in the back of the truck so it wasnt burnt. I find loads of Hazel and Ash twist sticks but never found a Holly one before. I spoke to a friend of mine and he said it would be worth in its current state about £30. I'm going to dry it out in the garage so it dries out naturally and then remove the stubs and round off the handle.

004.jpg.ba114701882fbf08125fd1f730cf21e9.jpg

003.jpg.6e58abb43f1eb594f5c85ba0e9db28f0.jpg

002.jpg.95b343c1f314fb024a31d9f3f2c018da.jpg

001.jpg.592a0e3b9fc8aa4a09fc87be1a2c9dbe.jpg

Log in or register to remove this advert

Posted

That's a nice bit of wood!! i got a shepherds crook for my 21st lastyear for my sheepdog trailing. the shaft is elm and the crook handle is oak... it cost £50 and took 2 weeks to make. So you might be on to a winner with that holly.. those twirls are ace!!

Posted

used to make loads of walking sticks, honey suckle twist is rare on holly, with holly because its such a wet wood i used to varnish it first to slow down the drying out process, because they tend to split, but then after drying for about a year holly normally looks better with the bark removed and then varnished with coulered varnish or mix a bit of coffee powder in with varnish to get a nice colour.

Posted

Very nice, and when dried will fit right into the beating line.

 

I wouldnt put horn on it, leave it natural all the way. Maybe a brass ferel on the foot, but thats it.

Posted

a nice looking stick matt! odd to see that on holly.

 

We have mass of honeysuckle here and its constricted a chestnut in a lot of areas, leaving markings just like that but a lot deeper!

Posted

That looks brilliant, love the light spiral in it, you caught it before it got too disfiguring.

 

I found this little number on my CS31 not so many years ago, felling small Douglas fir I found this at the top and kept it. Obviously I've turned it on it's head but that bulb at the end is where the tip snapped out and new apical dominance set in, forming a new leader while beautifully fulfilling the law of minimal lever arm!

 

The bulbous bit at the end was a whorl of smaller branches and as such has lots of knots in and might end up looking nice once somethings been done with it! I stripped the bark off as soon as i got home and it's dried perfectly with no cracking.

DSCF0200.jpg.aecdda3c291e7d6b2d1c27a5360605e9.jpg

DSCF0198.jpg.8453e44f2af8c88681c1773f03dcf275.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.