chipper for U900

[Mike Hill]

I reckon you would still have to fab up a frame,as a three point linkage chipper is only for that type of linkage.There might be ones that would fit but,fabing up a frame would be a very simple task.Much,much cheaper than buying the three point linkage setup for your mog.Somebody here might be able to construct somethink for you?

Ask about.

[b101uk]

As Mike says a frame would need to be made to carry the 3pt mounting of the chipper with that of the 4pt mount on the unimog.

 

The digger mountings like that are far stronger than a 3pt hitch, as the tearout forces of the digger arms in both up and down as well as laterally planes are very high, the arms on the bigger diggers mounted on mogs are almost as powerful as e.g. a Jcb 3cx or Cat 428/438.

 

The other option would be to modify a tractor front 3pt to fit on the rear of your mog

[skyhuck]

The other option would be to modify a tractor front 3pt to fit on the rear of your mog

 

The advantage to doing this is you may wish to use other implements on the rear of your mog, maybe a winch ?

[J The Tree]

The chap selling the Mog had a woodchipper with the correct mounts to fit on yours

[Log-ologist]

Does that mog need a gearbox? I would think so by looking at the bare flywheel.

[_tc]

Does that mog need a gearbox? I would think so by looking at the bare flywheel.

 

The gearbox has a broken seletor shaft thats why its out of the truck. I will rebuild the box myself.(hgv mechanic in previous life).

 

I have spoken to Atkinsons and they were most helpful so expect to see the truck back in service in the next 2 weeks.

Thanks for the replies chaps and i will let you know what i figure out about a chipper.