cs39 thursday

[monkey boy]

guys im really nervous any tips

[Paul Smith]

Relax and enjoy!

[Tom2020]

1.Dont fall out the tree

 

2.Bribe the nptc bloke

 

3.Dont drop the saw out of the tree

 

Erm not much els

 

Oh best of luck m8 hope you pass

[MaxJ]

Go steady and make sure your cuts are accurate. Make sure you take time getting into the best working position and the rest will be easy.

Dont rush!! Good luck

[grumpydavesmith]

Honestly mate its easy. Get an excellent position and think about your cuts and take your time. i took extra time with a good anchor n secondary it makes a big difference.

 

Good Luck

 

Dave

[Bolt]

As said above.... Just get yourself into a really good work position. As long as you do your cuts will be no harder than doing a CS30 and loads easier than a CS31!

[monkey boy]

cheers guys

[peckerwoo]

confirming the above - the better the work position the easier the cuts! >90% of times spent getting into WP and moving around compared to the minimal time the saws working.

and the more chainbrake the more safer your work ethic looks!

I had a near 0 degree vertical main rope (on a cambium saver), strop/lanyard on right side D and a tiestrap as a left foothold and was cutting nowhere near any of `em.

utilise the slack main rope too if it aids getting into a good work position?

I`m a rookie sure but its still fresh in my mind

[Dave D]

pay attention, ask about ANYTHING you are unsure about and most importantly relax and enjoy. good luck.

[RobRainford]

do the cuts in 4 stages, work position, visualise the cut, hold the saw up and offer it up to where you want to cut, then cut!