conifers

[burrell_]

after the first conifer job i did i didnt get the price rite i have bin asked to price this one up its a removel 16m wide 5ft trunk and 3 glass house round the trunk and a 5m drop zone round the bottem off the trunk is a best off a tree so any advice would be great and what price they think the may charge thanks for anyhelp martin

[Ian Flatters]

Anyway of winching it over? if not looks like climbing and rigging/speedline?

 

Day rate 1.5days to be safe + chipper + loads of material + subbys rate = quote,

Edited April 9, 2010 by Ian Flatters

[ukminch]

Hard to tell from the pictures. At a guess I'd put a day on it, but I'd probably get a big skip in for the logs/chip as there will be a lot of stuff come off it. Obviously depends on your set up and how close your tip site is.

 

R

[testcricket01]

looks like a simple days work from the pictures.

 

you takeing away the chip and logs or leaveing it onsite?

 

what sort of dragging is it going to be to the chipper?

[burrell_]

no room to winch it over

brush drag would be 40 yards

take chipes away leave logs

and i no u cant really tell from pic really but it is bigger than the pic makes it look

[testcricket01]

i reackon a few sheets cheap boarding to cover the green house you could cut and chuck most all of it a days work i would have said

[Ian Flatters]

One day then. agree on the boards for the greenhouses, turn as much into logs as you can and if your lucky you may only have one load + sawdust and rakings.

[Mozza]

Id put an easy day on it for 2, Going off the pictures, If the drags a bitch id get a 3rd person in just to help drag out!

 

Doesnt look much but pictures can be deceiving haha

[Mozza]

Just re read, 16 metres wide???

[ukminch]

One day then. agree on the boards for the greenhouses, turn as much into logs as you can and if your lucky you may only have one load + sawdust and rakings.

 

Depends on how small you can go with the logs..... I reckon 2 transit type loads there easily

 

R