Jump to content

Log in or register to remove this advert

Srt and drt


Recommended Posts

Hi all

 

Im about to delve into the world of srt.

 

I have bought a beginner kit rope wrench and hitch climber ect

 

I was going to start only using it as a means for access and switch over to drt.

 

My question is can i use the srt and a second rope on drt to climb around on and be classed as being on 2 ropes system? Basically taking the 2nd rope up with me or get a groundsman to clip it on after my ascent.

 

2nd question i know there are benefits to each but which is a better option for a beginner to climb on for srt canopy or basal?

 

All help is much appreciated. 

 

Aaron 

Link to comment
Share on other sites

Log in or register to remove this advert

Interesting question about the 2nd line. Standard practice for a lot of industrial and rope rescue is a Petzl ASAP or similar on a static second line, which follows you around quietly and only bites when it moves quickly. Handy to have and just forget about it, but I don't know how that fits in with the legal requirements in UK arb.

 

Can't be any more help I'm afraid, someone else will be along shortly. 

  • Thanks 1
Link to comment
Share on other sites

14 hours ago, Aaron R said:

My question is can i use the srt and a second rope on drt to climb around on and be classed as being on 2 ropes system?

Not a problem, a lot of climbers do the same especially while getting to grips with SRT.  You would need two systems while ascending to be compliant with current regulations. 

 

14 hours ago, Aaron R said:

2nd question i know there are benefits to each but which is a better option for a beginner to climb on for srt canopy or basal?

 

Not sure either is 'better' for a beginner. Use whichever is best for a given situation. 

 

Base anchor can avoid the need to isolate a limb when installing an access line but will double load the top & additional bounce in the system will be less efficient.

 

Often safer to work off a canopy anchor - base is vulnerable to chainsaw cuts from careless groundies & entanglement when dropping out limbs. 

Edited by Logjam
  • Like 2
  • Thanks 1
Link to comment
Share on other sites

It is definitely job dependent, but I normally use a base tie to ascend then switch to a canopy anchor.

You can make that retrievable from the ground if you like.

 

Can’t comment on the 2-rope system I’m afraid!

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.