Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Anyone got any ideas?

 

Doesn't engage gears and won't move forward or backwards 

 

2003 automatic disco

 

I have checked it hasnt slipped out of hi

 

What could this be? And how much to repair?

Log in or register to remove this advert

Posted (edited)

Have you checked props and half shafts?

the Govnor in back of gearbox used to give trouble in the d1.

also check the selector cable hasn’t given up/stretched

Edited by Will C
Posted
  On 13/09/2023 at 19:26, HJK said:

Anyone got any ideas?

 

Doesn't engage gears and won't move forward or backwards 

 

2003 automatic disco

 

I have checked it hasnt slipped out of hi

 

What could this be? And how much to repair?

Expand  

have you checked the XYZ switch on top of the gearbox?

 

they are known to have issues on the auto

 

i went through 2 of them when i had mine 

  • Like 1
Posted
  On 14/09/2023 at 06:27, Stihl123 said:

have you checked the XYZ switch on top of the gearbox?

 

they are known to have issues on the auto

 

i went through 2 of them when i had mine 

Expand  

Could be, I think it would be throwing up the M & S lights on the dash though, mine has just had xyz switch repaired (£600 for a new one!). OP- when you select from neutral to drive does it register it on the dash screen?

  • Like 3
Posted

Yeh I must be blind but I've had a good look under and found a nice little leak just above ish the gearbox

 

It's a completely stock disco 2 (for now) 

 

I haven't thought of the xyz switch or the transfer cable so thanks for those shouts

 

I will let you know tomorrow if the dash screen changes when I select gears 

Posted
  On 14/09/2023 at 20:32, HJK said:

Yeh I must be blind but I've had a good look under and found a nice little leak just above ish the gearbox

 

It's a completely stock disco 2 (for now) 

 

I haven't thought of the xyz switch or the transfer cable so thanks for those shouts

 

I will let you know tomorrow if the dash screen changes when I select gears 

Expand  

Air con drains pretty much on to the xyz switch which causes alot of the problems- not the finest idea landrover have had. You can take them apart clean them all up and reseal which is what mine has just had done- works fine now. 

  • Like 1
Posted
  On 14/09/2023 at 20:32, HJK said:

Yeh I must be blind but I've had a good look under and found a nice little leak just above ish the gearbox

 

It's a completely stock disco 2 (for now) 

 

I haven't thought of the xyz switch or the transfer cable so thanks for those shouts

 

I will let you know tomorrow if the dash screen changes when I select gears 

Expand  

What colour leak?  If its atf it should be red- always hard to tell with leaks though 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Read more  

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.