Grab

[woody paul]

On 22/03/2023 at 05:48, doobin said:

I take it that's with a hitch plate?

 

Another company that might be worth a look is A13 Engineering. They have a range of Hardox grabs which are clearly based upon the Intermecatto and the prices are keen. I would have purchased one for my new backhoe but there is a big gap in the range for that size machine. Here's the spec sheet they sent me.

A13 Spec Sheet (7).pdf 4.57 MB · 18 downloads

Just had time to have a good look at there grab and compare they must have some steel in them as only 4 tines and come in heavier then intermecato one of the same size digger also opens up bigger. 

[woody paul]

So the plan is to use grab off loader set up and see how we get on with it. 

Made headstock, biggest problem is fixing bolts same as arm width so a bit of head scratching to get over it. Have also made a plate to fit under side so you undo 4 main bolts and just spin it the just out bolts back. 

If it works well will probably buy A13 engineering grab from what I have see of them they are a 4 tine grab.