346xp issues

[spudulike]

Probably the plastic plug in one....degrease both with brake cleaner and I use a US sealer called "seal all" but you may get away with cyanoacrylate or super glue to the uninitiated.

Just make sure you don't get it on the breather parts, just the outer casing.

[William Clifford]

Thanks for that, he's tried both types and reckons it's the later one but says it is a surprisingly loose fit. Can't imagine that is normal? Have ordered some Seal all for him to try.

[lurch_917]

On 24/03/2022 at 19:28, peatff said:

Could have been worse, he could have said push the manifold onto the flange as well😏

im glad he didnt say first put some lube on your nipple then slip the rubber on .

[spudulike]

This is the breather, it is slightly possible it has been loose for a long time and worn the hole larger...I trust it was an OEM part.

Fuel Tank Vent fits Husqvarna 135, K770, K970 Disc Cutters - 501 15 29 01 | L&S Engineers

WWW.LSENGINEERS.CO.UK

---

Fuel Tank Vent fits Husqvarna 135, K770, K970 Brushcutters Genuine Husqvarna Part OEM No. 501 15 29 01 Suitable for the Following Applications: 135, K770, K970, K760 CUT-N-BREAK...