Rayco 1620 hydraulic threads

[trigger_andy]

Anyone have any idea what threads there would be on the hydraulics of a Rayco 1620? I'll assume its going to be NPT as its an American machine but would be great if it was BSP. 

[openspaceman]

1 hour ago, trigger_andy said:

Anyone have any idea what threads there would be on the hydraulics of a Rayco 1620? I'll assume its going to be NPT as its an American machine but would be great if it was BSP. 

@aspenarbwill know but often American hydraulic machines used JIC fittings, same thread as BSP but the cone seals are reversed from BSP. Also they tend to use a lot of tapered thread fittings.

[trigger_andy]

On 06/01/2022 at 19:34, openspaceman said:

@aspenarbwill know but often American hydraulic machines used JIC fittings, same thread as BSP but the cone seals are reversed from BSP. Also they tend to use a lot of tapered thread fittings.

Turns out they're all NPT. Seems simple enough finding a cross over from 1/2" BSP to 1/4" NPT though so all good.