Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Just back from looking at the veteran ash pictured. The huge root complex extends throughout the cornish hedge (slates in wall). There are sizeable cavities in all the limbs as you can see. The central trunk has a very large cavity (view of which a little blocked by wooden platform customer has constructed for standing on to remove ivy). I could get my arm well up into the trunk - in fact all my arm went up and I could feel the soggy mess up there. Tree has been pollarded (4-5 yrs ago) as you can see. Customer wants to re-pollard :001_rolleyes: and remove if dangerous. What do you reckon?

01022010311.jpg.cdce8a27356d0d6b7aeb943f08aaabcc.jpg

01022010314.jpg.ea4eba36402a43bfd6cd4016fcc912b3.jpg

01022010313.jpg.6a3b18bd9c546d33ac2a11d995972e9f.jpg

01022010310.jpg.1c6b1081811ad649ac96459746d3240f.jpg

01022010309.jpg.c0a01520503198b55146f19c2d0a84f1.jpg

Log in or register to remove this advert

Posted (edited)

What an interesting Tree.

 

Appears to be in rude health and putting on adaptive girth.

A fine looking veteran.

 

With that in mind, from my angle, I would assess the pollard points and possibly re-pollard, perhaps as a giraffe with one or two sap risers for a couple of years, then take these out when/if the new canopy sprouts.

 

........or, take a sharp intake of breath, mutter something along the lines of - hazard, targets, doggy, and get it down for firewood asap.

 

Any Fungal fb's present?

 

 

 

Nice shots.

 

 

 

 

.

Edited by Monkey-D
Posted

I would try to retain as much of the lower section of the tree as possible, bet is a haven for habitat. Could you not try to coppice it just above the lower forks and cavities? Granted it would not look great, but it would be safe(er)

Posted

I know its difficult to tell from photos, but I'd be very surprised if this tree was hazardous in its current form.

 

Also, once its been pollarded you will have removed the sail area, so the chances of the stems falling over (I would guess) are almost zero.

 

Hope this helps

 

:001_smile:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.