19-28 sheers bars

[Clicky]

Hi

Come to flip the shear bars on my 19-28 tow along and have noticed the vertical has cracked. Anyone know where I can pick one up from this week if possible? I've seen orangeplant have quadtrak ones in, that look very similar but not sure if there the same?

Thanks Matt

[Jase hutch]

Hi Clicky , 

Quadtrack ones are different. 

Try Ash at GA Groundcare , he may be able to help  ??

Jase.

[openspaceman]

3 hours ago, Clicky said:

Hi

Come to flip the shear bars on my 19-28 tow along and have noticed the vertical has cracked. Anyone know where I can pick one up from this week if possible? I've seen orangeplant have quadtrak ones in, that look very similar but not sure if there the same?

Thanks Matt

@Jase hutch may know. Parts diagrams for the quadtrak may be in the manual which is probably a download on the Greenmech site so you could compare part numbers. If the vertical one is cracked I suspect you'll live to regret hoping it will last. From the numbers it may be common with the older 220.

 

The 1928 has three shear bars

 EC1928-2-31
 Top shear bar
  EC1928-2-29
 Lower shear bar
  CM220-2-31
 Vertical shear bar
 

[Jase hutch]

17 minutes ago, openspaceman said:

@Jase hutch may know. Parts diagrams for the quadtrak may be in the manual which is probably a download on the Greenmech site so you could compare part numbers. If the vertical one is cracked I suspect you'll live to regret hoping it will last. From the numbers it may be common with the older 220.

 

The 1928 has three shear bars

 EC1928-2-31
 Top shear bar
  EC1928-2-29
 Lower shear bar
  CM220-2-31
 Vertical shear bar
 

Yes I think it's the same as the horizontal shearbar in a 220..

[Clicky]

OK will give Ga groundcare a go

Cheers guys

[openspaceman]

2 hours ago, Jase hutch said:

Hi Clicky , 

Quadtrack ones are different. 

Try Ash at GA Groundcare , he may be able to help  ??

Jase.

Looks like you were sending whilst I was still looking up part numbers

[Jase hutch]

34 minutes ago, openspaceman said:

Looks like you were sending whilst I was still looking up part numbers

You did a better job than me..😉

[openspaceman]

6 minutes ago, Jase hutch said:

You did a better job than me..😉

Hey I guess you're taking a bit of a break while I'm getting a bit bored not getting out and about.

[GA Groundcare]

On 30/12/2020 at 19:10, Clicky said:

OK will give Ga groundcare a go

Cheers guys

We can supply. Vertical bar is £204.94 ex vat.