GREENMECH 150 Hydraulic Coil alternatives

[Flo]

Hi Everyone I am looking for help My GreenMech 150 has developed a feeding issue stops feeding after around 5 or 10 minutes of use then starts again after a little while I have found the Hydraulic valve forward feed roller coil to be the culprit partnumber #PQC 160-6-9018 unfortunately GreenMech has stopped dispatching parts for the hols and won't be starting until the 5th of Jan again does anyone know of a alternative that can be used? 

 

Many thanks Flo

[PeteB]

Some dealers might have stock, try ringing around a few. Think we got a couple of self isolating and a positive or two plus I had heard of a stock take!

[Flo]

1 hour ago, PeteB said:

Some dealers might have stock, try ringing around a few. Think we got a couple of self isolating and a positive or two plus I had heard of a stock take!

Cheers Pete I will give it a shoot 👍🏼

[Jase hutch]

Or swap the top and bottom coils until you can get a replacement  ??

The faulty coil should be ok on reverse as it won't be used as much so shouldn't overheat. And you'll have the good coil operating the infeed.

Jase.

[monkeybusiness]

If you end up totally stuck take the coils out and take pics and send them to Flowfit - they’ll be able to match something up.

[Flo]

8 minutes ago, Jase hutch said:

Or swap the top and bottom coils until you can get a replacement  ??

The faulty coil should be ok on reverse as it won't be used as much so shouldn't overheat. And you'll have the good coil operating the infeed.

Jase.

Good shout will try that tomorrow 👍🏼

[Flo]

3 minutes ago, monkeybusiness said:

If you end up totally stuck take the coils out and take pics and send them to Flowfit - they’ll be able to match something up.

Thanks 👍🏼

[Jase hutch]

If you're really stuck then give me a call on 01789400044 and I'll see if I can get one sent out somehow. 

Jase.

[Flo]

24 minutes ago, Jase hutch said:

If you're really stuck then give me a call on 01789400044 and I'll see if I can get one sent out somehow. 

Jase.

Thanks Jase will be in touch 👍🏼👌🏼

[GA Groundcare]

We carry these in stock if you need... Sorry only just logged on and seen the thread.