Jump to content

Log in or register to remove this advert

Graphite powder may corrode aluminium?


WeeDee
 Share

Recommended Posts

I read today that tests have shown that graphite powder corrodes aluminium in the presence of moisture. With this considered, the US Air Force no longer uses graphite as an lubricant on its aircraft - either in dry powder form or mixed with water or oil.

It's something to do with graphite having a positive potential and aluminium having a negative one.

Has anyone been aware of this (it's news to me), or can anyone expand on this information?

I've never had experience of this kind of aluminium 'corrosion', or heard of anyone else who has.

I leave it open to this forum. :confused1:

 

Dee

Link to comment
Share on other sites

Log in or register to remove this advert

I've never had experience of this kind of aluminium 'corrosion', or heard of anyone else who has.

 

Just have a look at the side of the next landrover defender you pass. They have a luverly habbit of "reacting" where the galv capping meets the Ally:thumbdown:.

 

Andy

Link to comment
Share on other sites

Just have a look at the side of the next landrover defender you pass. They have a luverly habbit of "reacting" where the galv capping meets the Ally:thumbdown:.

 

Andy

 

I've had aluminium react with other things (roadsalt etc.) but I thought graphite powder was 'safe'.

Link to comment
Share on other sites

I would have thought that the amount of movement in a carabiner, and the constant abuse they get, the graphite is gone within a few hours anyway.

In my experience of inspecting them, most krabs usually free up after a good clean and wd40 and then when dry, put a small amount of graphite down to keep the action smooth.

 

Within an hour of climbing in the rain, it will be gone and the barrel clean enought to work normally again.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.