HUSQVARNA 572 BAR LENGH?

[jonnyrobbo1234]

Was just wondering what the best bar lengh would be on a 572?

[Coletti]

Depends what you want to cut with it. It'll pull a 28 fine but if you've not got that size timber to cut then I'd probably stick it on a 20, will fly through timber.

[gdh]

It seems balanced and handles well on a 24 but doesn't struggle if you do want to go bigger. 

[The avantgardener]

I had some very large Silver and Grand Fir to fell recently, had an  18” and 24” combo on the 572xp, ran both superbly.

[outinthewood]

As already said it depends on what you are cutting ? In my case I run a 28" most of the time and it runs well.

I got it with a 20" and have run a 24".

[wyk]

From what I have seen, it can oil up to a 33" bar, so you're good there. It all depends on what sort of cutting you do. If you man handle it a lot, bore cut often, and back bar it at the stump, you'll need to tailor it to those needs.