New Panther Mini Bars for Stihl MS150T, MSA160T, Echo CS-2511TES, Husky T525, T536Li XP

[Rob D]

We will very shortly have our new Panther Mini bars in so you can run the Stihl 3670-71PM3 1/4 .043 chain on the Husky T525, T536Li XP, MS150T, MS150, MSA160T and Echo CS-2511TES.

 

These are all dedicated bars for the specific saws and all run 56 drive links of the Stihl chain - the idea being to simplify things so that all the 10" bars for these little saws run the same drive link count of the same chain.

 

*NB on the Husky T536Li XP and 536Li XP you will need to change the drive sprocket from 3/8 lo pro to 1/4 https://www.chainsawbars.co.uk/product/husqvarna-14-sprocket-for-536li/

 

For the Stihl bar go here https://www.chainsawbars.co.uk/product/e10-j1-42k-cv-1-10-panther-mini-echo-cs-2511tes-1-4-043-56-drive-links-expected-20th-may-2018/

 

For the Husky bar go here https://www.chainsawbars.co.uk/product/e10-d2-42k-cv-1-10-panther-mini-husky-525-536li-t536li-xp-1-4-043-56-drive-links-expected-20th-may-2018-copy/

 

For the Echo bar go here https://www.chainsawbars.co.uk/product/30050083403-stihl-rollamatic-e-mini-10-14-043-57-drive-links/

 

 

 

They look pretty snazzy. I've tested one for a month or two but I'm not doing the sort of hours cutting that someone full time on the tools does... we don't have them yet but you can pre order online.

 

 

[Gray git]

Typical, just ordered a bunch of stuff off Lawrence and asked about these, would have added it to the order if I'd known you were taking pre orders.

[Rob D]

On 09/05/2018 at 21:06, Gray git said:

Typical, just ordered a bunch of stuff off Lawrence and asked about these, would have added it to the order if I'd known you were taking pre orders.

That's ok we'll do you one postage free if you like.

 

I need to double check it goes round the T525 drive sprocket ok... we have plenty as in plenty coming in so there will be no worrys about running out in the short term.