Jump to content

Log in or register to remove this advert

Recommended Posts

Log in or register to remove this advert

Posted

That's the whole thing Paul.

If my entire RW suddenly disintegrated nothing would happen, nothing at all.

I find my hitch a bit sticky on descent, but that would be it.

Posted

Have the Arb Association been working with HSE to release a guidance document for SRT use in the UK? If so, when will it be released and what will it cover? If not, can you let us know what the Arb Associations stance of SRT is and it's place in tree climbing operations?

Posted
Have the Arb Association been working with HSE to release a guidance document for SRT use in the UK? If so, when will it be released and what will it cover? If not, can you let us know what the Arb Associations stance of SRT is and it's place in tree climbing operations?

 

Hi, "good question."

 

Indirectly the Arb Assoc (AA) is working with HSE on SRT by virtue of working with industry on production of revised tree climbing guide which will be 'endorsed' by the HSE on completion...hopefully. This project should commence in the (very) near future along with other, new, technical guidance (rigging / cranes.)

 

Because of the above, i.e. the absence of any authoritative guidance, the AA stance is difficult one as we equally recognize it is used in industry, and climbing comps, and in fact we offer a course in such to raise awareness (see Arboricultural Association - Course Detail )

 

So, not an absolute answer coz there isn't one currently I'm afraid...but it is moving in the right direction, I hope.

 

Thanks for yer post :thumbup1:

Paul

Posted
..but at least now you're covered from an insurance point of view should anything untoward happen where the device is implicated...or even if not sometimes :001_huh:

 

But would this German led ' problem' affect us here in the UK insurance wise?

 

Seems a little strange that now the Germans have to buy the RW with the approved tether only, the RW on it's own still has no CE approval.

 

I used the ZK1 with a home made tether made from a Petzl webbing sling, 22kn, i wonder if that would pass the pulley test?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.