.404 bar and chain

[Rayburn]

Hi folks, ive been searching for a bar and chain for a 3120 but cant seem to find anything shorter than 36" and i already have one of those.

 

I am looking for something around 26" in length. Its a .404 chain with a .063 gauge.

Can anyone reccomend somewhere that would do such a thing?

Much appreciated.

[Stubby]

Hi folks, ive been searching for a bar and chain for a 3120 but cant seem to find anything shorter than 36" and i already have one of those.

 

I am looking for something around 26" in length. Its a .404 chain with a .063 gauge.

Can anyone reccomend somewhere that would do such a thing?

Much appreciated.

 

Try Rob D on here .

[Rayburn]

Many thanks

[TheHungrySquirrel]

May be easier to switch to a 3/8 sprocket and get a bar that fits a 395. Only difference is the chain size between the two, same bar mount and oiler location.

[C.J]

Try Rob D on here .

 

Rob has an Oregon 243RNFD009 on his website.

[C.J]

May be easier to switch to a 3/8 sprocket and get a bar that fits a 395. Only difference is the chain size between the two, same bar mount and oiler location.

 

May have to change from a 6 spline clutch drum to a 7 spline clutch drum - 3/8 rim not available in 6 spline.

[shavey]

Or you could do what I do get the Sugihara D033 , D009 bars in 3/8 what ever length needed and purchase the 404 tips and change when ever needed

[Rayburn]

Rob has an Oregon 243RNFD009 on his website.

 

That's what I have gone for, hopefully all sorted

Thanks for the replies

[C.J]

Looks like Oregon only do the 404 in 24" or 36"

 

But you can have 3/8 in 26,28 or 30 if you want something in between.

[C.J]

That's what I have gone for, hopefully all sorted

Thanks for the replies

 

Will be a lot better balanced and nicer to use.