Kubuta v2203 bleeding

[mark hooper]

Hi I have a Jensen A430 and I have changed diesel filter as per book

But when I shut off valve on the side of pump it shuts down

Any help appreciated

[Breezeblock]

which valve are you meaning can you take a picture of it

[skyhuck]

which valve are you meaning can you take a picture of it

 

If its the same as my mini digger, its a thumb screw on the side of the injector pump. You unscrew it to bleed the system, once its running you screw it in and it should be sorted.

[cornish wood burner]

Might pay to check your filter is seating correctly and not drawing in air.

If you have square seals then check one is not twisted.

Presumably you have remembered to fully turn on your tank tap if you needed to turn it off.

[mark hooper]

Yes

Filter sat correctly on new seal

Thumb screw is on side of pump

I have opened thumb screw releasing last injector and bleed machine running

It's when I close off screw which is the tank return I presume

Machine needs bleeding again ???

[Jase hutch]

Give 'Paddy' at 'Bryco' a ring on :01327 876166

He's the best there is on Kubota.....!

[Breezeblock]

If its the same as my mini digger, its a thumb screw on the side of the injector pump. You unscrew it to bleed the system, once its running you screw it in and it should be sorted.

 

I was wondering that I thought most were using the 10mm screw to bleed it