Rustic Bench ideas

[54gka]

Yeah two supports fixed to the uprights and fixed with hex head screw sleeper fixings. Plug the holes with some off cuts. Sometimes i might use tight bond 3 wood glue and on the thinner benches fix a centre support under seat. Make sure you get the distance right between the seat and the back as the first one i made they were to close together and found that your backside was perched on the edge of the seat so had to slide it forwards.

[mistajay]

 

 

Here's one I've cut out, took me about half an hour, need to sand it down and peg it together as it's freestanding at the moment

 

 

Sent from my iPhone using Arbtalk

[se7enthdevil]

nice job there mate but if that is beech then don't forget to give it about 30 coats of danish to let it last as long as possible.

[mistajay]

nice job there mate but if that is beech then don't forget to give it about 30 coats of danish to let it last as long as possible.

 

 

Cheers for the advice

 

 

Sent from my iPhone using Arbtalk