Jump to content

Log in or register to remove this advert

Aled Hughes

Member
 View Profile  See their activity

  • Posts

    85

  • Joined

  • Last visited

 Content Type 

Everything posted by Aled Hughes

  1. Aled Hughes
    Thanks spud I'll examine it closer and keep you posted.
  2. Aled Hughes
    No I don't as I compared that to my 562 and thought something isn't right in that area.
  3. Aled Hughes
    Good evening a bit of help is required. I've a 560xp that I start the usual way choke it fired, push lever down to fast idle, it fires and idles on that but when you blip the throttle nothing changes it's as if it's continuously on fast idle. Took exhaust off and lots of excess fuel there which is exactly as I suspected. Any help appreciated thank you
  4. Aled Hughes
    I've rebuilt many a 346xp and ms260's so I do have a compression tester, pressure/vacuum tester,crank cases splitter etc so that work I'm not worried about. Jusneed that power/ throttle response which I'm sure could be unleashed by the right person. Thanks again
  5. Aled Hughes
    OK thanks, maybe a muffler mod to begin with but shame it can't be done same time as my teardown to do bottom end.
  6. Aled Hughes
    Ah right ok shame really would love to have it opened up. Think I need to tear it down as revs were raising yesterday when I laid her on the ground whilst clearing a huge beech. Any recommendations on someone? Done fancy sending it to the states for tinman to do 😄
  7. Aled Hughes
    spudulike. Thanks so much for your prompt reply, I'll get onto it and keep you posted. It really needs wakening up aswell so probably get back to you regarding that unless you'd like to reply with your thoughts Thanks
  8. Aled Hughes
    Sorry spudulike predictive txt now corrected.
  9. Aled Hughes
    Sorry predictive txt should have read saws. So a partial tear down to get to the generator or is there a way to measure current at the switch when the saw is running to avoid the teardown? Thanks
  10. Aled Hughes
    Any of you guys out there that can give me advice on the above saws non working g. I have a multimeter so I can use that at the switch connection but just need to know what to set it at and what readings I should get. Any more advice welcomed thanks

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.