ScottWojo

Saws with modified mufflers run cooler and will be less prone to heat damage from operator errors. Other than a modified muffler you can buy a Maxx Flow air cleaner. After this all you have to do is set the squish, then machine the base of the cylinder. Then take that same amount off the top of the piston about a 1/4 inch from and to the outside of the piston. This makes a pop up piston and gives higher compression and better power gains. Also, you can widen the intake and exhaust ports and match the carp and the muffler to the new port sizes.

Well, depends on your saw make and model. Most can be made to run better with a muffler enhancement and a better breathing air cleaner. The Stihl 044 046 and 066's can be fitted with a Max flow air cleaner. And some guy from eBay makes really nice muffler mods.

Al, I did look for it But could not find it.

Hello Folks. I am the muffler guy. Nice site. The Video below is not one of my saws. But it is me using it. The owner is actually the guy who named my mufflers early on, "Cut4fun" [ame=http://www.youtube.com/watch?v=_sMidtP4v8M]Wojo using C4fun's 084[/ame]