Big Bolt

How did your test's go buddy ok we hope

the chassie looks like a mat but the cab is not

if he is getting red eyes and it is a woodburner he must have a leak in the smoke side of the fire tell him nobody else has had a proplem / or if you value his custom go around and have a look for yourself with a fire blazing birds only take a few days to start a nest . did he have a poroblem before the sweep went there he could of dislodged somthing so many variable you need to see the proplem

They will be good buddy , we all wish it

there is a bar at the back of the pto g/box this has a couple of adjustments on it to level the g/b i had not done this when pic was taken also the pully that is out of alignment can be moved along the spindel i have added washers to the pto mount's , to be hornest there are loads of combanations under there

aslong as the pto is not moved left or right on its mount the drive belts will be ok it is when you adjust the drive belt to remove slack you get the misalignment , as i said all the mounts under there are all adjustible , but the only way to get the belt proplem done is to elongate the mounting holes for the pto g/box

if you look at the first pic at the back right hand side you can see the mounting bar and the 2 holes to give you more adjustment hope that helps

I would not touch a mog if its on flea bay YOU DONT KNOW WHERE IT'S BEEN

good luck with the hunting

Hang on in their bud don't let it get you down as andy say's it is just around the corner:thumbup1: , and congrat's on the soon to be little patter of feet

all the best

big bolt

true but fed up with the plugs breaking get left on and trashed and dirt getting in if you live in a area that does sugerbeet you would understand , cheers for the replies lad's

has anyone fitted a remote control to tip trailer as the winch systems have ?

thats cheap ,maybe to cheap !!!! the siamex mob i do believe had a 90 at saltex with a tipper on the back a few years ago looked cool but not very usable

just forgot dont hang the conveyer for long of the wire it will twist the bottom support i prop mine with a plank of wood

belt change on jappa 700 I removed the gearbox and then extend the plate holes it sits in and refit the gear box it will be foward enough to change belts quikly next time i also had to move the the first belt pully to align with the pto drive the pic's are before work . the second pic shows the plate gearbox sit's on and the pully that has to be moved on the shaft i hope this help's I love the jappa it is the only machine I have found that loads from the right as im right handed

it would be more prudent to get it by weight then no nonsense

why go forward all this teckno is only costing us more ££££££ the 346 is a good saw

why change it a lighter saw eat more fryup's a more powerfull saw keep what your got tuned and sharp

If god had a chainsaw !!!!!!!!!!!!!!!

willburt where are you located

the reason you get normaly a slow puncture with tubes in tubles tyres , on the inside of the tyre are raised strips of rubber and in time they rub through the wall of your inner tube slow puncture i fill mine up from new with agri tyre seal never had a flat yet , jrose you beat me to it

i think you find one on the bay at the mo £ 5500. nearly new

Welcome buddy try farmbits at wymondham 01953 606668

on site today , not my cup of tea !!!!!

can be a bit jolty if your ham fisted and have the hyd flow set to high weight is 100 k

Get a boxer .....

Hi crazy cutter i have the b/a cat in my yard i use it for spares , rob andrews sold it to me , this is the one on the back of the low loader cut all the metal work of it , and fitted some moderd h14 winches it drags my fire tray's about

did you do any of the clearance work at east ruston ? that's where i first saw it with the entec on skid's

My way don't drive them to job's only the renault

the top hinge I place upside down to stop the gate pixie's from borrowing it, the gate that is !!!

just looked at my paper licence for the first time and I have C1+E so that should save me some penny's her indoors will have to get one for the trailer tent though !