Big Bolt

hi bud go onto youtube and watch, TU-17 Griphoist operation

Blaisey what make is the grapple on you boxer ?

did anyone see the nice new sithl look a likes £ 70 cooooooool

I do 50 % of the time , it's a job like anything else if you are not confident using one then let it lie as it could bite even with some body on site .

well done to all that braved the weather yesterday at the show good effort I liked the lardometer

you are not alone what a load of tosh ive got four young kid's i have to get up and work for my family, take there money away . if this does not stop where will it end

yes there are some familys that need help so help them, and let the dross rot

the one in there add with it on is quite small the p30 is quite small that is what it was designed for , one just like the big boy,s , i do belive it will take a 200kg hammer . Im like you at the mo the 190/200 i need to auger out or it takes forever if it's into dry stuff ,

got another wet job coming up 2m clearence line ,over hanging trees , looking for a small protec p30 to fit on the holder for some of the straight bit's

this is a job we just finished in and out of trees , dyke edge , low branche's , little boxer was great .

Morning all

loads of people on this exellent forum are always asking questions but about where can i get this , can i have work , IF YOU DONT GIVE YOUR COUNTY AT LEAST, WE ARE NOT MIND READERS rant over:lol:

you lucky lucky sod I would ride a honda to own one of them !!!!!!!!!!!!!!!!!

pete's machine is the old version you can't pull the bar's back to ride and drive .

had a e.mail back from the makers's .Hello Kew,

Great pictures, nice to see that the Ironhorse is a good machine for your kind of work. Yes, it’s thru that we don’t have

any dealer in UK at the moment. What I can recommend in the near future is that You buy direct from us. I have attached

the spare parts catalogue and by this You can give us needed part no. and we will quote You each time, if this is OK?

Of course we are at the same time working to get a good co-operation with some company “over there”, and I hope this

occasional solution is Ok. If there are any person interested to buy a new Ironhorse, maybe You can give them mine contact info.

and I will make them a quote.

Have a nice day!

Med vänlig hälsning/ Best regards,

Torbjörn Resvik

Export Manager

Lennartsfors AB

Lennartsfors 1

672 92 ÅRJÄNG

Phone: +46 573-392 28

Fax: +46 573 300 35

Mob: +46 76-1168120

E-mail: [email protected]

Web-site: Lennartsfors AB

Im off round the back of a house to dig out about 6 ton of soil/rubble with my trusty boxer

where abouts are you located bud

are they a good make and proper chain ?

you get some pic's up first bud.

sent a email to LENNARTSFORS the company who produce iron horse will wait for there reply

all the time cable normally snaps first !!

so that's why the have never returned my e.mails and fobed me of when i rang

they could of had the gut's to tell me they where running down . i had better not break it before a new dealer set's up !! i will have a word with there parent company and ask if a reb is bieng found for GB

Lubly jubly nice to hear your home , , getting ready for the little one ,all the best to you and your growing family

is was told no as there is a restrition zone of 20 metres that no person should be in / so as no person is is close to the crane end so no loler / not like a hiab where people could be in the user zone then yes , i may be wrong

the restrition zone should be visible on the crane boom and may vari

chap has said it will only hold 1.5 ton if !!!

Forestry timber crane trailer 1 owner from new on the bay

as title says, not seen one like this before presuming it was council .or made up in his scrap yard ? Anybody got any ideas of the make

It look's tiny there are 3 blokes in that cab and it look's busting but as it is easten block it will take some jib and about 4/5 ton in the back !!! They can make good truck's