Logosol Sauno VT3

[Patlmc]

I have a brand new, never used Logosol Sauno VT3 kiln which I am going to sell and thought I would see if anyone is interested in it. It is 240v.

 

It is the complete kit, heater, assembly screws and self assembly box and it currently retails for £1400. I am looking for around half that.

 

Wonderful bit of kit, just not going to use it as plans have changed.

 

Can post photo's etc, located close to Oswestry, Shropshire.

 

(If this is the wrong place to post please point me in the correct direction and apologies in advance!)

[timbernut]

They're on logos ok website for £768 inc vat

[Patlmc]

They're on logos ok website for £768 inc vat

 

Well spotted Sir!

 

 

Or not..... that is the price of the VT3 2Kw heater by itself.

 

The kiln box is £430 plus VAT (£516) and the fixing kit is £46 plus VAT (£55.2).

 

Sauno Wood Drying Kiln | More | LOGOSOL

 

[timbernut]

Ahh! Was not being picky but a couple of my colleagues are currently looking at investing in a kiln and may be interested, if you pm me your contact details I'll pass em on.

Funnily enough one of em is from Oswestry way originally! We're Norfolk based

[Patlmc]

No problems! PM on its way.

 

I should have put the link in first off. Sadly 35 years of jumping out of perfectly serviceable aircraft and landing on my head most of the time is my only excuse!

[timbernut]

Quite a good one though!

[Treemoose]

How big is the box? can't seem to see the info on the website

[Patlmc]

Hi

 

http://www.plano.se/sauno/ByggforslagEngCompl.pdf

 

2450mm (L) x 600mm (W) x 1150 (H)

 

I haven't assembled the box as it requires glueing (Gorilla is recommended) but all the assembly kit is included, large plastic screws and vents.

 

Any other info please PM or ask away.

[Patlmc]

Sorry, should point out that the instructions

 

http://www.plano.se/sauno/ByggforslagEngCompl.pdf

 

show the boards requiring cutting and rebating. The Logosol Kiln kit is already done and the panels are numbered. It just requires assembly using the large plastic screws and Gorilla glue.

[OliB]

I have one, and am considering adding a second so I can make a bigger box (for longer limbers). So if you can't sell the whole bunch, I'd be interested in just he VT3.

 

I'm down the road nr Ludlow.

 

Oli